SOP for Cleaning of Metrohm Karl Fisher

1.0 OBJECTIVE

To clearly define the cleaning of Metrohm Karl fisher.

2.0 SCOPE

This procedure is applicable to karl fisher installed in quality control laboratory.

[ads id="ads1"]

3.0 RESPONSIBILITY

3.1 Doing : Technical Assistant

3.2 Checking : Executive /Manager

4.0 ACCOUNTABILITY

Head of the Department

[ads id="ads1"]

5.0 PROCEDURE

5.1 Before switching ‘ON’ the instrument wipe the instrument with cloth.

5.2 On completion of the titration, Press ‘Out’ at the rear side of the Ti stand to drain out the solvent from the titration vessel.

5.3 Press ‘In’ at the rear side of Ti stand to fill the vessel with Methanol.

[ads id="ads1"]

5.4 Again drain off the methanol.

5.5 Switch off the instrument

5.6 After switch off the instrument, clean the instrument with cotton cloth.

[ads id="ads1"]

6.0 ABBREVIATION

6.1 SOP - Standard Operating Procedure

Previous Post Next Post

Share our Posts

Latest Learning