Guidelines for Pharmaceutical Stability Study
Following are the guidelines for stability study conduction for new products:
1. Formal stability study should consist of accelerated and long term stability testing on at least two primary production batches for stable drug products and in case of the susceptible drug products at least three primary production batches should be considered.
2. The accelerated stability testing data at 40°C / 75% for minimum six months and long term stability testing data at 30°C / 65% for minimum 12 months should be available at the time of submission for new drug application and can be continued further.
3. The product stable for 6 months at 40°C / 75% (Accelerated stability testing conditions) then it can be assigned the shelf life of 24 months.
[ads id="ads1"]
4. If the shelf life period exceeding the 24 months is to be assigned to the product the real time stability testing data should be available.
5. Though not accepted internationally, as internal policy decision we can give the shelf life of 36 months if the product is found stable at accelerated stability testing conditions of 40°C / 75% for 12 months.
6. The shelf life of 36 months or more can be assigned to the drug formulation after completion of long term stability testing for 36 months or more.
7. If there is a change in the primary packing material the product should be treated as the new product for conduction of stability studies.
8. The stability studies should be performed on each individual strength of the drug product unless bracketing is applied.
9. If the same product is having the different doses (different strengths) and identical production formulation, and but different production process then each should be treated as a new product the stability study should be carried out separately for each of the strengths.
10. The frequency of the testing for long term stability testing should be initiated and after every 3 months over the first year, every 6 months over the second year and annually thereafter throughout the proposed shelf life.
[ads id="ads1"]
11. The frequency of the testing for accelerated stability testing should be initial 3 months and 6 months.
12. While labeling the stability samples the terms ambient conditions or room temperature are not acceptable.
13. The stability testing should cover chemical, physical, biological and microbiological attributes including preservative content and the testing of those attributes of the drug products that are susceptible to change during storage and are likely to influence quality, safety and or efficacy of the drug product.
[ads id="ads1"]
14. Out of three batches selected for stability study testing, the at least two batches should be pilot scale batches and the third one can be smaller if justified.
15. The photostability testing should be carried out on at least one primary batch of the drug product.